Zenith XZM Ultrafine mill is widely used in making fine powder or micro powder, a new kind of machine for producing fineness and ultra-powder. It is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished production can be adjusted between 325-2500 mesh.

 
Ultrafine mill Features:
1. Reliable
2. High capacity and low cost
3. Easy adjustment of product fineness
4. Clean, environmental protection
Ultrafine mill Technical Data:

Tab 1:
item	XZM215	XZM221	XZM227
Number of roller(piece)	15	21	27
Ring diameter(mm)	Φ600	Φ 800	Φ1000
Number of ring (piece)	3	3	3
main equipment rotate speed（r/min）	235	235	235
Max. inlet size（mm）	≤10	≤10	≤10
Final size (mesh)	325－2500	325-2500	325-2500
Capacity（kg/h）	350-2500	600－4000	900－6000
Overall size（m）	10×2×5.5	12.4×2.5×5.8	14.5×3.8×6.3
Note: If there is any change of above specification, it is all according to the booklet with machine.

Tab2:
Basic data	Item	Unit	specification
			XZM215	XZM221	XZM227
motor of main machine	Model	-	Y250-4	Y250-4	Y250-4
	Power	kw	37	55	110
classify Frequency modulation motor	Model	-	Y180M-4	Y180M-4	Y180M-4
	Power	kw	11	18.5	30
Motor of elevator	Model	-	Y100L-4	Y100L-4	Y100L-4
	Power	kw	3	3	3
Motor of blower	Model	-	Y225M-2	Y225M-2	Y225M-2
	Power	kw	30	45	90
Hammer crusher	Model	-	250-400	250-400	250-400
	Power	kw	5.5	5.5	5.5
Electromagnetism Vibrating feeder	Model	-	GZ1F	GZ1F	GZ1F
	Power	kw	0.06	0.06	0.06
discharge valve	Model	-	ZJD-1：40	ZJD-1：40	ZJD-1：40
	Power	kw	0.75	0.75	1.1
Pulsed duster	Model	-	BMC72-11	BMC72-11	BMC72-11
	Power	kw	3	3	3
Note: If there is any change of above specification, it is all according to the booklet with machine.